Jin Jing Science and Technology yesterday released in 2010 and 2011 a quarter. Jin Jing Science and Technology 2010, 3.15 billion yuan revenue, an increase of 36%; to achieve net profit of 3.6 billion attributable to listed companies, an increase of 206.9 percent, corresponding to earnings per share were 0.61 yuan, to be 10 shares per 10 shares.
1 quarter of 2011, solar water heater achieved revenues of 790 million yuan, up 12.8%; to achieve ownership of listed companies is 72.179 million yuan net profit, an increase of 19.52%, corresponding to EPS of 0.11 yuan.
Glass and soda-than-expected performance of the common support, this year is growth in technical innovation from the ultra-clear glass production capacity. August 2010 peak demand-pull glass industry after prices rise, the price increase of more than 10%. Operating profit in the year about 2 billion from floating glass; ultra-white glass with high solar energy industry to benefit the economy, the annual production of 11 months,solar collector sales of 3.2 million heavy boxes, contributed operating profit of about 1 million. Soda ash industry to benefit the business and glass peak power demand limit, in November reached the highest point in East China price 2350 yuan / ton, the average price increase of 90% of the beginning of the year, the annual contribution to the profit of about 1 million.
End of Moore's Law Morris Chang Jiang Shangyi notice.
TSMC chairman Morris Chang and senior vice president Jiang Shangyi 25, although on different occasions, but all agreed that the technical development of the global semiconductor industry in the next 10 years, met the current R & D is still difficult to overcome bottlenecks. Chang directly said about another 6 to 8 years, Moore's Law (Moore'sLaw) will be technically difficult to encounter barriers across the global semiconductor industry trends will be changed to emphasis on new product applications; and Jiangshang Yi also said that TSMC is currently Power 28-nanometer process technology has been put into trial production is expected to extend to 7 nm is estimated, there are about 10 years of development time.
Morris Chang 25, attend the "Global Technology Forum", on global development issues and strategies of the major challenges, and from Malaysia, Australia, Germany, India, Japan, Russia, Spain, the United States, Vietnam's industry experts for discussion. Chang noted that Taiwan Semiconductor Manufacturing Company was established in 1987, the technology behind the world's leader in about two generations, 24 years later, only two manufacturers worldwide with rival Taiwan Semiconductor Manufacturing Company, showing the semiconductor industry has become over the past few 10 years, Taiwan, one of the most successful industries.
He pointed out that, in accordance with Moore's Law, the global semiconductor industry technology every 2 years will be the new generation, but as more and more rapid technological development, the industry will sooner or later most of that went to the semiconductor industry, the technical limit. And he thought, about another 6 to 8 years, the arrival of such technology will limit the future development of the semiconductor industry should be to go to the new applications, such as low power, video and other markets, though! Future of IC (integrated circuit) development has been small, but the printed circuit board (PCB) there is still room for miniaturization.
Jiangshang Yi also said that the development of the global semiconductor industry, process technology, in addition to holding a miniature chip manufacturing technology to challenge the limits in accordance with Moore's Law, the current industry while working to make the entire system is small, so that faster and more stable power, so Jiang Shangyi that global semiconductor industry, there are many innovative space. Jiang Shangyi also disclosed that the TSMC 28 nm process technology has been imported trial production is expected to shrink to a sustainable 7 nm process, but further down, you have to see if technology can tie the whole industry will be on.
Jiang Shangyi further pointed out that TSMC will be 70 in 2011 customer product design decision (Tapeo =), more than 40 nm more than 2 times, the current process technology, TSMC will set the tone for the direction of R & D in 20 nm process technology expected the second half of 2012, the trial production will be imported. The 18-inch wafers, the Jiangshang Yi said he expects the trial production in 2014 ~ 2013, when the 20-nanometer process will be cut, and TSMC expects 18-inch wafer pilot line will be located in the Hsinchu plant, 2015 ~ 2016 Taichung plant will be completed on the production line to build.
In Chang and Jiang Shangyi industry leaders have seen the future development of the global semiconductor industry, technology difficulties, the Morris Chang, TSMC is also anxious for the other industries the layout of the action strategy endorsement, and that the future development of solar and LED industry look very pretty, TSMC also has confidence in the future of thin film polysilicon solar technology can do and just as good.