Split pressurized solar water heater

Products Model:001
Products Detail:

specification：

Inner tank: stainless steel sus304/2B

Outer tank: gavanize/colour steel

Collector Frame: aluminium alloy

Insulation:high density polyurethane foam,δ50mm

58×1800mm，SU-SS-ALN/AIN， Hail resistance: 25 mm

heater pipe: Ø14-6-0.6mm,inside of Vacuum tube

Accessories:control station,magnesium,electrical heater,non return valve,safety valve

Copper coiler:for heat exchanging,Ø12mm×18m/Ø12mm×12m

header tube:seamless copper TU1

Outer manifold: aluminium alloy

Working Temp.:-20 to 300 °C

Working pressure: less than 10 bar

Feature

1)The control meter can be through workstation temperature probe simultaneously detect module and the temperature of the water tank

2)Water tank has a heat transfer copper coils, can put hot medium energy release to the water

3）Module absorb sunlight energy hot heating up, workstations detection instrument of water tank control temperature and the temperature of the module to fixed temperature difference (users can set the default to 5 ° C), the circulating pump station by control instrument control began circulating, through the medium of heat cycle of import water tank

4）Through the circulation pump drive the cycle of medium temperature of water tank, and the module is becoming smaller, until the temperature difference of 0, control is used to test the temperature difference is 0, the stop circulating pump work,

5）Module absorption, the energy of sunlight to produce temperature difference, then again cycle medium, round and round, make tank temperature rise gradually, output hot water

6）Hot water outlet pressure big, use more convenient and comfortable

7）Double coil's water tank still can use hot water heating heating to the room

8）The use of medium, can effectively prevent frost realization of the goal

9）life span: 5years for system/15 years for tube